Stump Grinding in Lexington, GA
The Oglethorpe County seat. Bob grinds stumps on acreage, pasture, and land left with stumps after timber cutting.
PHOTO: grinder working on a stump
Lexington is the seat of Oglethorpe County, one of the most rural counties we serve. The land around it is acreage, pasture, and woods, and a good share of the stumps Bob sees out here come from timber cutting, where a stand of trees was harvested and the stumps were left across the ground.
After timber cutting, the property is often a field of stumps where the owner wants to put pasture, a food plot, a building site, or simply a clean piece of ground. Each stump is an obstacle to mowing, fencing, or driving across the land until it is ground out.
Land Left After Timber Cutting
When timber is cut, the stumps stay. Across a few acres, that can mean dozens of them, ranging from small pine stumps to large hardwood ones. Bob clears multiple stumps in one visit, scheduling the whole property so the ground is clear in one pass.
The Rayco track-mounted grinder handles stumps from 3 inches in diameter up to 8 feet wide, so a mix of pine and hardwood stumps across a cut-over property is no problem. Bob grinds each one down where it stands, without tearing up the ground around it.
Acreage and Pasture
On acreage going to pasture or a building site, the goal is usually a clear piece of ground. Bob grinds the stumps and can rake the grindings smooth as mulch or haul them away, depending on what comes next for the land.
For a spot going to grass, remove most of the chips and fill with topsoil first, because grindings settle as they break down. Georgia Piedmont red clay under the chips drains slowly, so a low spot can hold water until it is topped up.
One Visit, One Cleanup
On a property full of stumps, it makes sense to schedule them together rather than call someone out again and again. Bob clears the whole lot in one visit, then cleans up the grindings so the ground is ready for the next step.
Cleanup is part of the job. You tell Bob what you want done with the grindings, raked as mulch or hauled away, and he handles it before he leaves.
Stump Services We Offer in Lexington
From a single stump to a whole lot full, Bob grinds it down and cleans up after the job. For a full rundown of how the grinder works, see our stump grinding page.
Stump Grinding
Grind that stubborn stump down below grade so you can mow straight over it.
Stump Removal
Full stump and root crown removal by grinding, not a messy excavation.
Grinding Cleanup & Mulch Removal
We rake the grindings smooth as mulch or haul them away when you're done.
Multiple Stump & Property Clearing
Whole-property clearing for lots full of stumps, big or small.
What a Lexington-Area Customer Said
“Arm Co has worked at my house on two different occasions. Both times the owner asked me what I expected which I appreciated. And both times my expectations were fulfilled with excellent professional service.”
Reviews shown as posted on Google. Read our Google reviews →
Lexington Stump Grinding — Common Questions
Can you clear stumps left after timber cutting near Lexington?
Yes. Bob clears multiple stumps in one visit, from a handful to a full lot, on cut-over acreage. The grinder handles pine and hardwood stumps from 3 inches up to 8 feet wide.
Do you grind stumps on pasture land?
Yes. On acreage going to pasture, Bob grinds the stumps and can rake the grindings smooth as mulch or haul them away. For a spot going to grass, remove most of the chips and fill with topsoil first.
How many stumps can you grind in one visit?
Bob schedules multiple stumps in one visit, from a handful across the property to a whole lot full. One visit, one cleanup, one clear piece of ground.
How far is Lexington from your base?
Lexington is about 20 miles from our Hull base. Jobs are scheduled, so call or text (706) 207-2341 to get on the calendar.
What do you do with the chips on a large acreage job?
Your choice. Bob can rake the grindings smooth as mulch across the ground, or haul them away if you want a clean slate for pasture, a building site, or grass.
More of Our Service Area
Lexington is in Oglethorpe County, one of six Northeast Georgia counties we serve. See the full service area →
Clarke County
Oconee County
Oglethorpe County
Franklin County
Map of Lexington, GA
Get a Stump Grinding Quote
Tell us about the job. Bob will get back to you. Or call (706) 207-2341.
Locally Owned, Six Counties Served
ARM Co Stump Grinding is locally owned in Madison County. Bob works with neighbors across:
- Madison County
- Clarke County
- Oconee County
- Jackson County
- Oglethorpe County
- Franklin County